You cannot disassemble it for cleaning; you just wash with soap and water. (I've found that pulsing the jar with some soap and warm water inside works pretty well, but it takes some effort to get down around the very bottom of the mixing blades with a brush.) The lid has a lot of grooves and crannies but it cleans up pretty well; if you're some kind of sterility fanatic, it's hard to get under the sliding spout cover, but you can rinse it with soap and water to get it clean.
As to functionality, as far as this unit goes, it's fine. The mixing action is quite good, and the lid stays tightly on the jar. I've mostly used it for light powder mixes, nothing heavy; it does well with that, and takes very little pulsing to get a good mix. The directions state that it is not to be used for hot drinks, or heavy solid foods. It can probably handle fruit chunks, but it is far from a powerhouse.
A few drawbacks: as noted, the motor is not strong. Others have complained that it burns out with long use; I have only used it in quick-pulse mode, and that is what I would recommend. It runs at very high speed and vibrates if you don't hold it while pulsing; I don't know how long you can expect it to last - it really does seem to be laboring with even light duty. My real complaint is the lid: the only lids provided are the "drink-through" type with a hole in the lid near the drinking spout, and a flat sliding cover that opens and closes the hole (it is not a positive-cover system, like some spring-loaded types - it is just a flat cover that slides in a groove back and forth over the hole). The cover is nowhere near watertight, and there is also a small airhole on the other side of the lid that has no cover at all. This means that the drink will seep out easily if you tip the jar, even with the lid on and the cover closed. Liquid also oozes up around the hole cover while you are pulsing the mixer, so the lid gets wet and dirty before you even finish making your drink. If you are carrying it in a bag or purse, you have got to be very careful never to tip the bag, and probably should enclose the drink cup in a plastic bag. This is a pain, and really detracts from the usefulness of the system, which is, obviously, intended to be portable. I don't understand why they built a product expressly for the purpose of creating liquid drinks to take out of the home with you, and made the container leaky. I would prefer a simple completely closed cover that you could remove to drink; I understand that many people prefer the sip covers, especially in their cars, but, compared to other to-go containers on the market, this one is unusually cheesy. If you are using this system to make drinks to take with you for lunch or a workout later in the day, you essentially have to spend your entire day worrying about leaks and remembering to hold your container carefully upright - which is the opposite of making things easier for you.
In short, the system works well enough and is very convenient in terms of speed and ease of use. It takes only minutes to mix up a drink, and then you don't have to find a container to put it in (or have two separate containers to clean). Having two mixer jars is great for couples or for making two drinks to have with you at different times of the day. However, there are questions about the durability of the motor, and the leaky lid creates a serious hassle. The latter is particularly regrettable, because otherwise it's a great system.
Travel lid lets you drink from the jar
Fits in most car drink holders
Great for fruit smoothies, icy drinks, shakes and more
Stainless steel blades
One-touch blending
More Product :
Powerful 390-watt motor Waring Professional Bar Blenders
Hamilton Beach 51101B Personal Blender with Travel Lid, Black
0 comments:
Post a Comment